How to Load BCHobbyist Modified Firmware on VIOFO Dash Cams
Step 1) Download the MOD FW desired for A129 , A119S , A119Pro , A119
Step 2) Insert MicroSD card into Computer using Card Reader.
Step 3) COPY the MOD file to Root of empty memory card.
Step 4) Rename A129 MOD file eg. FWA129_MOD-27W+DCTeam.bin to FWA129.bin
Rename A119S MOD file eg. FWA119S_MOD-26S+DCTeam.bin to FWA119S.bin
Rename A119Pro MOD file eg. FWA119P_MOD-27P+DCTeam.bin to FWA119P.bin
Rename A119 MOD file eg. FWBA119_MOD-27L+DCTeam.bin to FWBA119.bin
Step 5) Safely Remove/Eject/Unmount memory card from computer.
Step 6) Disconnect power cable from Dash Camera.
Step 7) Insert MicroSD card with correctly named binary file into Dashcam.
Step 8) Connect power to Dashcam wait 60-80 seconds for Dashcam to restart.
Step 9) Stop recording, enter MENU, select DEFAULT Setting, wait for Dash Cam to restart.
Step 10) Set Date, Time Zone, Resolution, Bitrate, Loop Recording, Sharpness...
Note: Pay close attention when Renaming the firmware file. Do not change the last 3 letter file extension. Some computers show .bin others hide file extensions, don't add .bin since its already there just hidden from view. Avoid incorrectly renaming firmware example: FWA129.bin.bin or FWA119S(1).bin
If any update fails it's very easy to recover using official stock firmware copied to microSD card then Power-On wait until it restarts (1 min).
Disclaimer: All BCHobbyist Modified Firmware is rigorously tested by DCTeam Members under all conditions world wide. These MODs are not official VIOFO releases and considered Beta Firmware, I/we are not responsible for damage, loss, injury, or greatly improved image quality, use at your own risk.
